Show patches with: Submitter = Andrej Picej       |    State = Action Required       |   65 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[15/15] arm64: dts: imx8mm-phycore-som: Add overlay to disable SPI NOR flash Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[14/15] arm64: dts: imx8mm-phycore-som: Add no-eth phy overlay Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[13/15] arm64: dts: imx8mm-phycore-som: Add overlay for rproc Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[12/15] arm64: dts: imx8mm-phyboard-polis: Add overlay for PEB-EVAL-01 Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[11/15] arm64: dts: imx8mm-phyboard-polis: Add support for PEB-AV-10 Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[10/15] arm64: dts: imx8mm-phyboard-polis: Assign missing regulator for bluetooth Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[09/15] arm64: dts: imx8mm: move bulk of rtc properties to carrierboards Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[08/15] arm64: dts: imx8mm-phygate-tauri-l: Set RTC as wakeup-source Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[07/15] arm64: dts: imx8mm-phyboard-polis: Set RTC as wakeup-source Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[06/15] arm64: dts: imx8mm-phyboard-polis: add RTC description Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[05/15] arm64: dts: imx8mm-phycore-som: add descriptions to nodes Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[04/15] arm64: dts: imx8mm-phycore-som: Assign regulator for dsi to lvds bridge Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[03/15] arm64: dts: imx8mm-phycore-som: Remove magic-packet property Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[02/15] arm64: dts: imx8mm-phycore-som: Fix bluetooth wakeup source Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
[01/15] arm64: dts: imx8mm-phycore-som: Keep LDO3 on in suspend Update PHYTEC's i.MX8MM DTSs - - - --- 2024-11-25 Andrej Picej New
arm64: dts: imx8mp-phyboard-pollux: Disable write-protect on SD card arm64: dts: imx8mp-phyboard-pollux: Disable write-protect on SD card - 1 - --- 2024-07-16 Andrej Picej New
[2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties i.MX93 ADC calibration settings - - - --- 2024-03-20 Andrej Picej New
[1/2] iio: adc: imx93: Make calibration properties configurable i.MX93 ADC calibration settings - - - --- 2024-03-20 Andrej Picej New
[v2,3/3] ARM: dts: imx6: phycore: Rely on PMIC reboot/reset handler [v2,1/3] ARM: dts: imx6: phytec: fix RTC interrupt level - 1 - --- 2023-07-19 Andrej Picej New
[v2,2/3] ARM: dts: imx6: pfla02: Rely on PMIC reboot/reset handler [v2,1/3] ARM: dts: imx6: phytec: fix RTC interrupt level - 1 - --- 2023-07-19 Andrej Picej New
[v2,1/3] ARM: dts: imx6: phytec: fix RTC interrupt level [v2,1/3] ARM: dts: imx6: phytec: fix RTC interrupt level - 1 - --- 2023-07-19 Andrej Picej New
[2/2] ARM: dts: imx6: pfla02: Fix SD card reboot problem PHYTEC i.MX6 device-tree fixes 1 - - --- 2023-07-04 Andrej Picej New
[1/2] ARM: dts: imx6: phytec: fix RTC interrupt level PHYTEC i.MX6 device-tree fixes - - - --- 2023-07-04 Andrej Picej New
[v4,3/3] ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait mode Suspending i.MX watchdog in WAIT mode - 1 - --- 2022-11-04 Andrej Picej New
[v4,2/3] dt-bindings: watchdog: fsl-imx: document suspend in wait mode Suspending i.MX watchdog in WAIT mode - 3 - --- 2022-11-04 Andrej Picej New
[v4,1/3] watchdog: imx2_wdg: suspend watchdog in WAIT mode Suspending i.MX watchdog in WAIT mode - 2 - --- 2022-11-04 Andrej Picej New
[v3,3/3] ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait mode Suspending i.MX watchdog in WAIT mode - 1 - --- 2022-11-03 Andrej Picej New
[v3,2/3] dt-bindings: watchdog: fsl-imx: document suspend in wait mode Suspending i.MX watchdog in WAIT mode - 1 - --- 2022-11-03 Andrej Picej New
[v3,1/3] watchdog: imx2_wdg: suspend watchdog in WAIT mode Suspending i.MX watchdog in WAIT mode - 2 - --- 2022-11-03 Andrej Picej New
[v2,3/3] ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait mode Suspending i.MX watchdog in WAIT mode - 1 - --- 2022-10-25 Andrej Picej New
[v2,2/3] dt-bindings: watchdog: fsl-imx: document suspend in wait mode Suspending i.MX watchdog in WAIT mode - 1 - --- 2022-10-25 Andrej Picej New
[v2,1/3] watchdog: imx2_wdg: suspend watchdog in WAIT mode Suspending i.MX watchdog in WAIT mode - 1 - --- 2022-10-25 Andrej Picej New
[3/3] ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait mode Suspending i.MX watchdog in WAIT mode - - - --- 2022-10-19 Andrej Picej New
[2/3] dt-bindings: watchdog: fsl-imx: document suspend in wait mode Suspending i.MX watchdog in WAIT mode - 1 - --- 2022-10-19 Andrej Picej New
[1/3] watchdog: imx2_wdg: suspend watchdog in WAIT mode Suspending i.MX watchdog in WAIT mode - - - --- 2022-10-19 Andrej Picej New
[v2,3/3] ARM: dts: imx6ul: peb-av-02: move to 3 cell pwm PHYTEC i.MX 6UL/ULL devicetree patches - - - --- 2022-02-22 Andrej Picej New
[v2,2/3] ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULL PHYTEC i.MX 6UL/ULL devicetree patches - - - --- 2022-02-22 Andrej Picej New
[v2,1/3] dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL PHYTEC i.MX 6UL/ULL devicetree patches 1 - - --- 2022-02-22 Andrej Picej New
[RESEND,4/4] ARM: dts: imx6ul: peb-av-02: move to 3 cell pwm PHYTEC i.MX 6UL/ULL devicetree patches - - - --- 2022-01-31 Andrej Picej New
[RESEND,3/4] ARM: dts: imx6ul: phycore: Change USB LDO voltage for usb compliance PHYTEC i.MX 6UL/ULL devicetree patches - - - --- 2022-01-31 Andrej Picej New
[RESEND,2/4] ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULL PHYTEC i.MX 6UL/ULL devicetree patches - - - --- 2022-01-31 Andrej Picej New
[RESEND,1/4] dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL PHYTEC i.MX 6UL/ULL devicetree patches 1 - - --- 2022-01-31 Andrej Picej New
[v5,5/5] ARM: dts: imx6: phycore-som: set watchdog timeout mode to shutdown [v5,1/5] mfd: da9062: make register CONFIG_I writable - 1 - --- 2021-12-06 Andrej Picej New
[v5,4/5] dt-bindings: watchdog: da9062: add watchdog timeout mode [v5,1/5] mfd: da9062: make register CONFIG_I writable 1 2 - --- 2021-12-06 Andrej Picej New
[v5,3/5] watchdog: da9062: reset board on watchdog timeout [v5,1/5] mfd: da9062: make register CONFIG_I writable 1 1 1 --- 2021-12-06 Andrej Picej New
[v5,2/5] mfd: da9061: make register CONFIG_I writable [v5,1/5] mfd: da9062: make register CONFIG_I writable - 1 1 --- 2021-12-06 Andrej Picej New
[v5,1/5] mfd: da9062: make register CONFIG_I writable [v5,1/5] mfd: da9062: make register CONFIG_I writable - 1 - --- 2021-12-06 Andrej Picej New
[v4,4/4] ARM: dts: imx6: phycore-som: set watchdog timeout mode to shutdown [v4,1/4] mfd: da9062: make register CONFIG_I writable - - - --- 2021-12-02 Andrej Picej New
[v4,3/4] dt-bindings: watchdog: da9062: add watchdog timeout mode [v4,1/4] mfd: da9062: make register CONFIG_I writable - 1 - --- 2021-12-02 Andrej Picej New
[v4,2/4] watchdog: da9062: reset board on watchdog timeout [v4,1/4] mfd: da9062: make register CONFIG_I writable - 2 - --- 2021-12-02 Andrej Picej New
[v4,1/4] mfd: da9062: make register CONFIG_I writable [v4,1/4] mfd: da9062: make register CONFIG_I writable 1 1 - --- 2021-12-02 Andrej Picej New
[4/4] ARM: dts: imx6ul: peb-av-02: move to 3 cell pwm PHYTEC i.MX 6UL/ULL devicetree patches - - - --- 2021-12-01 Andrej Picej New
[3/4] ARM: dts: imx6ul: phycore: Change USB LDO voltage for usb compliance PHYTEC i.MX 6UL/ULL devicetree patches - - - --- 2021-12-01 Andrej Picej New
[2/4] ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULL PHYTEC i.MX 6UL/ULL devicetree patches - - - --- 2021-12-01 Andrej Picej New
[1/4] dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL PHYTEC i.MX 6UL/ULL devicetree patches - - - --- 2021-12-01 Andrej Picej New
[v3,4/4] ARM: dts: imx6: phycore-som: set watchdog timeout mode to shutdown [v3,1/4] mfd: da9062: make register CONFIG_I writable - - - --- 2021-12-01 Andrej Picej New
[v3,3/4] dt-bindings: watchdog: da9062: add watchdog timeout mode [v3,1/4] mfd: da9062: make register CONFIG_I writable - - - --- 2021-12-01 Andrej Picej New
[v3,2/4] watchdog: da9062: reset board on watchdog timeout [v3,1/4] mfd: da9062: make register CONFIG_I writable - - - --- 2021-12-01 Andrej Picej New
[v3,1/4] mfd: da9062: make register CONFIG_I writable [v3,1/4] mfd: da9062: make register CONFIG_I writable - - - --- 2021-12-01 Andrej Picej New
[v2,4/4] ARM: dts: imx6: phycore-som: set watchdog timeout mode to shutdown [v2,1/4] mfd: da9062: make register CONFIG_I writable - - - --- 2021-11-30 Andrej Picej New
[v2,3/4] dt-bindings: watchdog: da9062: add watchdog timeout mode [v2,1/4] mfd: da9062: make register CONFIG_I writable - - - --- 2021-11-30 Andrej Picej New
[v2,2/4] watchdog: da9062: reset board on watchdog timeout [v2,1/4] mfd: da9062: make register CONFIG_I writable - - - --- 2021-11-30 Andrej Picej New
[v2,1/4] mfd: da9062: make register CONFIG_I writable [v2,1/4] mfd: da9062: make register CONFIG_I writable - - - --- 2021-11-30 Andrej Picej New
[2/2] ARM: dts: imx6qdl: Handle unneeded MFD-subdevices correctly [1/2] ARM: dts: imx6: phyFLEX: add missing pmic mfd subdevices - - - --- 2021-11-23 Andrej Picej New
[1/2] ARM: dts: imx6: phyFLEX: add missing pmic mfd subdevices [1/2] ARM: dts: imx6: phyFLEX: add missing pmic mfd subdevices - - - --- 2021-11-23 Andrej Picej New