diff mbox series

[1/8] iio:adc:ina2xx: Improve error reporting for problems during .remove()

Message ID 20220515155929.338656-2-u.kleine-koenig@pengutronix.de (mailing list archive)
State Accepted
Headers show
Series iio: Improve error reporting for problems during .remove for various i2c drivers | expand

Commit Message

Uwe Kleine-König May 15, 2022, 3:59 p.m. UTC
Returning an error value in an i2c remove callback results in a generic
error message being emitted by the i2c core, but otherwise it doesn't
make a difference. The device goes away anyhow and the devm cleanups are

So instead of triggering the generic i2c error message, emit a more
helpful message if a problem occurs and return 0 to suppress the generic

This patch is a preparation for making i2c remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 drivers/iio/adc/ina2xx-adc.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
diff mbox series


diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 8d902a32a0fd..2eafe98cff3e 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -1039,12 +1039,18 @@  static int ina2xx_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+	int ret;
 	/* Powerdown */
-	return regmap_update_bits(chip->regmap, INA2XX_CONFIG,
-				  INA2XX_MODE_MASK, 0);
+	ret = regmap_update_bits(chip->regmap, INA2XX_CONFIG,
+				 INA2XX_MODE_MASK, 0);
+	if (ret)
+		dev_warn(&client->dev, "Failed to power down device (%pe)\n",
+			 ERR_PTR(ret));
+	return 0;
 static const struct i2c_device_id ina2xx_id[] = {