diff mbox series

[06/12] riscv: add support for MMIO access to the timer registers

Message ID 20191028121043.22934-7-hch@lst.de (mailing list archive)
State New, archived
Headers show
Series [01/12] riscv: abstract out CSR names for supervisor vs machine mode | expand

Commit Message

Christoph Hellwig Oct. 28, 2019, 12:10 p.m. UTC
When running in M-mode we can't use the SBI to set the timer, and
don't have access to the time CSR as that usually is emulated by
M-mode.  Instead provide code that directly accesses the MMIO for
the timer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
---
 arch/riscv/include/asm/sbi.h      |  3 ++-
 arch/riscv/include/asm/timex.h    | 19 +++++++++++++++++--
 drivers/clocksource/timer-riscv.c | 21 +++++++++++++++++----
 3 files changed, 36 insertions(+), 7 deletions(-)

Comments

Paul Walmsley Nov. 5, 2019, 6:01 p.m. UTC | #1
Daniel, Thomas,

On Mon, 28 Oct 2019, Christoph Hellwig wrote:

> When running in M-mode we can't use the SBI to set the timer, and
> don't have access to the time CSR as that usually is emulated by
> M-mode.  Instead provide code that directly accesses the MMIO for
> the timer.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Reviewed-by: Anup Patel <anup@brainfault.org>

Care to give a quick ack to the drivers/clocksource/timer-riscv.c changes?

thanks,

- Paul

> ---
>  arch/riscv/include/asm/sbi.h      |  3 ++-
>  arch/riscv/include/asm/timex.h    | 19 +++++++++++++++++--
>  drivers/clocksource/timer-riscv.c | 21 +++++++++++++++++----
>  3 files changed, 36 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
> index 0cb74eccc73f..a4774bafe033 100644
> --- a/arch/riscv/include/asm/sbi.h
> +++ b/arch/riscv/include/asm/sbi.h
> @@ -95,7 +95,8 @@ static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
>  	SBI_CALL_4(SBI_REMOTE_SFENCE_VMA_ASID, hart_mask, start, size, asid);
>  }
>  #else /* CONFIG_RISCV_SBI */
> -/* stub to for code is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
> +/* stubs to for code is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
> +void sbi_set_timer(uint64_t stime_value);
>  void sbi_remote_fence_i(const unsigned long *hart_mask);
>  #endif /* CONFIG_RISCV_SBI */
>  #endif /* _ASM_RISCV_SBI_H */
> diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
> index c7ef131b9e4c..e17837d61667 100644
> --- a/arch/riscv/include/asm/timex.h
> +++ b/arch/riscv/include/asm/timex.h
> @@ -7,12 +7,25 @@
>  #define _ASM_RISCV_TIMEX_H
>  
>  #include <asm/csr.h>
> +#include <asm/io.h>
>  
>  typedef unsigned long cycles_t;
>  
> +extern u64 __iomem *riscv_time_val;
> +extern u64 __iomem *riscv_time_cmp;
> +
> +#ifdef CONFIG_64BIT
> +#define mmio_get_cycles()	readq_relaxed(riscv_time_val)
> +#else
> +#define mmio_get_cycles()	readl_relaxed(riscv_time_val)
> +#define mmio_get_cycles_hi()	readl_relaxed(((u32 *)riscv_time_val) + 1)
> +#endif
> +
>  static inline cycles_t get_cycles(void)
>  {
> -	return csr_read(CSR_TIME);
> +	if (IS_ENABLED(CONFIG_RISCV_SBI))
> +		return csr_read(CSR_TIME);
> +	return mmio_get_cycles();
>  }
>  #define get_cycles get_cycles
>  
> @@ -24,7 +37,9 @@ static inline u64 get_cycles64(void)
>  #else /* CONFIG_64BIT */
>  static inline u32 get_cycles_hi(void)
>  {
> -	return csr_read(CSR_TIMEH);
> +	if (IS_ENABLED(CONFIG_RISCV_SBI))
> +		return csr_read(CSR_TIMEH);
> +	return mmio_get_cycles_hi();
>  }
>  
>  static inline u64 get_cycles64(void)
> diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
> index d083bfb535f6..f3eb0c04401a 100644
> --- a/drivers/clocksource/timer-riscv.c
> +++ b/drivers/clocksource/timer-riscv.c
> @@ -3,9 +3,9 @@
>   * Copyright (C) 2012 Regents of the University of California
>   * Copyright (C) 2017 SiFive
>   *
> - * All RISC-V systems have a timer attached to every hart.  These timers can be
> - * read from the "time" and "timeh" CSRs, and can use the SBI to setup
> - * events.
> + * All RISC-V systems have a timer attached to every hart.  These timers can
> + * either be read from the "time" and "timeh" CSRs, and can use the SBI to
> + * setup events, or directly accessed using MMIO registers.
>   */
>  #include <linux/clocksource.h>
>  #include <linux/clockchips.h>
> @@ -13,14 +13,27 @@
>  #include <linux/delay.h>
>  #include <linux/irq.h>
>  #include <linux/sched_clock.h>
> +#include <linux/io-64-nonatomic-lo-hi.h>
>  #include <asm/smp.h>
>  #include <asm/sbi.h>
>  
> +u64 __iomem *riscv_time_cmp;
> +u64 __iomem *riscv_time_val;
> +
> +static inline void mmio_set_timer(u64 val)
> +{
> +	writeq_relaxed(val,
> +		riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id()));
> +}
> +
>  static int riscv_clock_next_event(unsigned long delta,
>  		struct clock_event_device *ce)
>  {
>  	csr_set(CSR_IE, IE_TIE);
> -	sbi_set_timer(get_cycles64() + delta);
> +	if (IS_ENABLED(CONFIG_RISCV_SBI))
> +		sbi_set_timer(get_cycles64() + delta);
> +	else
> +		mmio_set_timer(get_cycles64() + delta);
>  	return 0;
>  }
>  
> -- 
> 2.20.1
> 
> 


- Paul
Thomas Gleixner Nov. 12, 2019, 10:39 a.m. UTC | #2
On Mon, 28 Oct 2019, Christoph Hellwig wrote:

> When running in M-mode we can't use the SBI to set the timer, and
> don't have access to the time CSR as that usually is emulated by
> M-mode.  Instead provide code that directly accesses the MMIO for
> the timer.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> ---
>  arch/riscv/include/asm/sbi.h      |  3 ++-
>  arch/riscv/include/asm/timex.h    | 19 +++++++++++++++++--
>  drivers/clocksource/timer-riscv.c | 21 +++++++++++++++++----

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Paul Walmsley Nov. 17, 2019, 11:06 p.m. UTC | #3
On Mon, 28 Oct 2019, Christoph Hellwig wrote:

> When running in M-mode we can't use the SBI to set the timer, and
> don't have access to the time CSR as that usually is emulated by
> M-mode.  Instead provide code that directly accesses the MMIO for
> the timer.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Reviewed-by: Anup Patel <anup@brainfault.org>

Thanks, queued the following for v5.5-rc1.


- Paul

From: Christoph Hellwig <hch@lst.de>
Date: Mon, 28 Oct 2019 13:10:37 +0100
Subject: [PATCH] riscv: add support for MMIO access to the timer registers

When running in M-mode we can't use the SBI to set the timer, and
don't have access to the time CSR as that usually is emulated by
M-mode.  Instead provide code that directly accesses the MMIO for
the timer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
[paul.walmsley@sifive.com: updated to apply; fixed checkpatch
 issue; timex.h now includes asm/mmio.h to resolve header file
 problems]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
---
 arch/riscv/include/asm/sbi.h      |  3 ++-
 arch/riscv/include/asm/timex.h    | 19 +++++++++++++++++--
 drivers/clocksource/timer-riscv.c | 23 +++++++++++++++++++----
 3 files changed, 38 insertions(+), 7 deletions(-)

diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 204af718df61..8e14d4819d0f 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -95,7 +95,8 @@ static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
 	SBI_CALL_4(SBI_REMOTE_SFENCE_VMA_ASID, hart_mask, start, size, asid);
 }
 #else /* CONFIG_RISCV_SBI */
-/* stub for code that is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
+/* stubs for code that is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
+void sbi_set_timer(uint64_t stime_value);
 void sbi_remote_fence_i(const unsigned long *hart_mask);
 #endif /* CONFIG_RISCV_SBI */
 #endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index c7ef131b9e4c..bad2a7c2cda5 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -7,12 +7,25 @@
 #define _ASM_RISCV_TIMEX_H
 
 #include <asm/csr.h>
+#include <asm/mmio.h>
 
 typedef unsigned long cycles_t;
 
+extern u64 __iomem *riscv_time_val;
+extern u64 __iomem *riscv_time_cmp;
+
+#ifdef CONFIG_64BIT
+#define mmio_get_cycles()	readq_relaxed(riscv_time_val)
+#else
+#define mmio_get_cycles()	readl_relaxed(riscv_time_val)
+#define mmio_get_cycles_hi()	readl_relaxed(((u32 *)riscv_time_val) + 1)
+#endif
+
 static inline cycles_t get_cycles(void)
 {
-	return csr_read(CSR_TIME);
+	if (IS_ENABLED(CONFIG_RISCV_SBI))
+		return csr_read(CSR_TIME);
+	return mmio_get_cycles();
 }
 #define get_cycles get_cycles
 
@@ -24,7 +37,9 @@ static inline u64 get_cycles64(void)
 #else /* CONFIG_64BIT */
 static inline u32 get_cycles_hi(void)
 {
-	return csr_read(CSR_TIMEH);
+	if (IS_ENABLED(CONFIG_RISCV_SBI))
+		return csr_read(CSR_TIMEH);
+	return mmio_get_cycles_hi();
 }
 
 static inline u64 get_cycles64(void)
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index d083bfb535f6..4e54856ce2a5 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -3,9 +3,9 @@
  * Copyright (C) 2012 Regents of the University of California
  * Copyright (C) 2017 SiFive
  *
- * All RISC-V systems have a timer attached to every hart.  These timers can be
- * read from the "time" and "timeh" CSRs, and can use the SBI to setup
- * events.
+ * All RISC-V systems have a timer attached to every hart.  These timers can
+ * either be read from the "time" and "timeh" CSRs, and can use the SBI to
+ * setup events, or directly accessed using MMIO registers.
  */
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
@@ -13,14 +13,29 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/sched_clock.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 #include <asm/smp.h>
 #include <asm/sbi.h>
 
+u64 __iomem *riscv_time_cmp;
+u64 __iomem *riscv_time_val;
+
+static inline void mmio_set_timer(u64 val)
+{
+	void __iomem *r;
+
+	r = riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id());
+	writeq_relaxed(val, r);
+}
+
 static int riscv_clock_next_event(unsigned long delta,
 		struct clock_event_device *ce)
 {
 	csr_set(CSR_IE, IE_TIE);
-	sbi_set_timer(get_cycles64() + delta);
+	if (IS_ENABLED(CONFIG_RISCV_SBI))
+		sbi_set_timer(get_cycles64() + delta);
+	else
+		mmio_set_timer(get_cycles64() + delta);
 	return 0;
 }
diff mbox series

Patch

diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 0cb74eccc73f..a4774bafe033 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -95,7 +95,8 @@  static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
 	SBI_CALL_4(SBI_REMOTE_SFENCE_VMA_ASID, hart_mask, start, size, asid);
 }
 #else /* CONFIG_RISCV_SBI */
-/* stub to for code is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
+/* stubs to for code is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
+void sbi_set_timer(uint64_t stime_value);
 void sbi_remote_fence_i(const unsigned long *hart_mask);
 #endif /* CONFIG_RISCV_SBI */
 #endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index c7ef131b9e4c..e17837d61667 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -7,12 +7,25 @@ 
 #define _ASM_RISCV_TIMEX_H
 
 #include <asm/csr.h>
+#include <asm/io.h>
 
 typedef unsigned long cycles_t;
 
+extern u64 __iomem *riscv_time_val;
+extern u64 __iomem *riscv_time_cmp;
+
+#ifdef CONFIG_64BIT
+#define mmio_get_cycles()	readq_relaxed(riscv_time_val)
+#else
+#define mmio_get_cycles()	readl_relaxed(riscv_time_val)
+#define mmio_get_cycles_hi()	readl_relaxed(((u32 *)riscv_time_val) + 1)
+#endif
+
 static inline cycles_t get_cycles(void)
 {
-	return csr_read(CSR_TIME);
+	if (IS_ENABLED(CONFIG_RISCV_SBI))
+		return csr_read(CSR_TIME);
+	return mmio_get_cycles();
 }
 #define get_cycles get_cycles
 
@@ -24,7 +37,9 @@  static inline u64 get_cycles64(void)
 #else /* CONFIG_64BIT */
 static inline u32 get_cycles_hi(void)
 {
-	return csr_read(CSR_TIMEH);
+	if (IS_ENABLED(CONFIG_RISCV_SBI))
+		return csr_read(CSR_TIMEH);
+	return mmio_get_cycles_hi();
 }
 
 static inline u64 get_cycles64(void)
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index d083bfb535f6..f3eb0c04401a 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -3,9 +3,9 @@ 
  * Copyright (C) 2012 Regents of the University of California
  * Copyright (C) 2017 SiFive
  *
- * All RISC-V systems have a timer attached to every hart.  These timers can be
- * read from the "time" and "timeh" CSRs, and can use the SBI to setup
- * events.
+ * All RISC-V systems have a timer attached to every hart.  These timers can
+ * either be read from the "time" and "timeh" CSRs, and can use the SBI to
+ * setup events, or directly accessed using MMIO registers.
  */
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
@@ -13,14 +13,27 @@ 
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/sched_clock.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 #include <asm/smp.h>
 #include <asm/sbi.h>
 
+u64 __iomem *riscv_time_cmp;
+u64 __iomem *riscv_time_val;
+
+static inline void mmio_set_timer(u64 val)
+{
+	writeq_relaxed(val,
+		riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id()));
+}
+
 static int riscv_clock_next_event(unsigned long delta,
 		struct clock_event_device *ce)
 {
 	csr_set(CSR_IE, IE_TIE);
-	sbi_set_timer(get_cycles64() + delta);
+	if (IS_ENABLED(CONFIG_RISCV_SBI))
+		sbi_set_timer(get_cycles64() + delta);
+	else
+		mmio_set_timer(get_cycles64() + delta);
 	return 0;
 }