Show patches with: Submitter = Anson Huang       |    State = Action Required       |   1322 patches
« 1 2 ... 11 12 13 14 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[2/4] dt-bindings: rtc: add binding doc for i.MX system controller RTC driver Add i.MX system controller RTC driver - - - --- 2018-11-27 Anson Huang New
[1/4] rtc: add i.MX system controller RTC support Add i.MX system controller RTC driver - - - --- 2018-11-27 Anson Huang New
defconfig: arm64: add i.MX system controller thermal support defconfig: arm64: add i.MX system controller thermal support - - - --- 2018-11-27 Anson Huang New
ARM: dts: imx6sll-evk: use WDOG_B pin reset ARM: dts: imx6sll-evk: use WDOG_B pin reset - - - --- 2018-11-22 Anson Huang New
ARM: dts: imx6sll-evk: add debug LED support ARM: dts: imx6sll-evk: add debug LED support - - - --- 2018-11-21 Anson Huang New
[V3] ARM: dts: imx7d-sdb: add rev-a board support [V3] ARM: dts: imx7d-sdb: add rev-a board support - - - --- 2018-11-20 Anson Huang New
[V2] ARM: dts: imx7d-sdb: add rev-a board support [V2] ARM: dts: imx7d-sdb: add rev-a board support - - - --- 2018-11-09 Anson Huang New
ARM: dts: imx6sx: specify proper clock for nodes with dummy clock ARM: dts: imx6sx: specify proper clock for nodes with dummy clock - - - --- 2018-11-07 Anson Huang New
ARM: dts: imx7d-sdb: add rev-a board support ARM: dts: imx7d-sdb: add rev-a board support - - - --- 2018-11-07 Anson Huang New
ARM: dts: imx6sl: vddpu is NOT an always-on regulator ARM: dts: imx6sl: vddpu is NOT an always-on regulator - - - --- 2018-11-06 Anson Huang New
ARM: dts: imx6sll: remove unused property in gpc node ARM: dts: imx6sll: remove unused property in gpc node - - - --- 2018-11-06 Anson Huang New
[V2] clk: imx7d: remove UART1 clock setting [V2] clk: imx7d: remove UART1 clock setting - - - --- 2018-10-19 Anson Huang New
clk: imx7d: remove UART1 clock setting clk: imx7d: remove UART1 clock setting - - - --- 2018-10-18 Anson Huang New
[2/2] clk: imx7d: remove CLK_IS_CRITICAL flag for arm_a7_root_clk [1/2] clk: imx: cpu clock should be always critical - - - --- 2018-10-17 Anson Huang New
[1/2] clk: imx: cpu clock should be always critical [1/2] clk: imx: cpu clock should be always critical - - - --- 2018-10-17 Anson Huang New
[V3,3/3] ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support Add i.MX6ULZ SoC support - - - --- 2018-09-30 Anson Huang New
[V3,2/3] dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board Add i.MX6ULZ SoC support - - - --- 2018-09-30 Anson Huang New
[V3,1/3] ARM: imx: add i.mx6ulz msl support Add i.MX6ULZ SoC support - - - --- 2018-09-30 Anson Huang New
[V2,2/2] cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull [V2,1/2] ARM: dts: imx6ul: use nvmem-cells for cpu speed grading - - - --- 2018-09-17 Anson Huang New
[V2,1/2] ARM: dts: imx6ul: use nvmem-cells for cpu speed grading [V2,1/2] ARM: dts: imx6ul: use nvmem-cells for cpu speed grading - - - --- 2018-09-17 Anson Huang New
[2/2] cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull [1/2] ARM: dts: imx6ul: use nvmem-cells for cpu speed grading 1 - - --- 2018-09-14 Anson Huang New
[1/2] ARM: dts: imx6ul: use nvmem-cells for cpu speed grading [1/2] ARM: dts: imx6ul: use nvmem-cells for cpu speed grading - - - --- 2018-09-14 Anson Huang New
ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point - 1 - --- 2018-09-12 Anson Huang New
ARM: dts: imx6qdl-sabreauto: add egalax touch screen support ARM: dts: imx6qdl-sabreauto: add egalax touch screen support - - - --- 2018-09-05 Anson Huang New
ARM: dts: imx6qdl-sabreauto: add gpio keys support ARM: dts: imx6qdl-sabreauto: add gpio keys support - - - --- 2018-09-05 Anson Huang New
[V2] ARM: dts: imx7s: enable cpuidle driver [V2] ARM: dts: imx7s: enable cpuidle driver - - - --- 2018-09-03 Anson Huang New
[7/7] ARM: dts: imx6: add mmdc ipg clock Add i.MX6 SoCs mmdc ipg clocks management - - - --- 2018-08-31 Anson Huang New
[6/7] clk: imx6q: add mmdc0 ipg clock Add i.MX6 SoCs mmdc ipg clocks management - 1 - --- 2018-08-31 Anson Huang New
[5/7] clk: imx6sl: add mmdc ipg clocks Add i.MX6 SoCs mmdc ipg clocks management - 1 - --- 2018-08-31 Anson Huang New
[4/7] clk: imx6sll: add mmdc1 ipg clock Add i.MX6 SoCs mmdc ipg clocks management - 1 - --- 2018-08-31 Anson Huang New
[3/7] clk: imx6sx: add mmdc1 ipg clock Add i.MX6 SoCs mmdc ipg clocks management - 1 - --- 2018-08-31 Anson Huang New
[2/7] clk: imx6ul: add mmdc1 ipg clock Add i.MX6 SoCs mmdc ipg clocks management - 1 - --- 2018-08-31 Anson Huang New
[1/7] ARM: imx: add mmdc ipg clock operation for mmdc Add i.MX6 SoCs mmdc ipg clocks management - - - --- 2018-08-31 Anson Huang New
ARM: dts: imx6sx-sdb: enable gpio buttons as wakeup source ARM: dts: imx6sx-sdb: enable gpio buttons as wakeup source - - - --- 2018-08-30 Anson Huang New
ARM: dts: imx6ull: update iomux header ARM: dts: imx6ull: update iomux header - 2 - --- 2018-08-30 Anson Huang New
[2/2] ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default [1/2] ARM: dts: imx7s: enable cpuidle driver - - - --- 2018-08-29 Anson Huang New
[1/2] ARM: dts: imx7s: enable cpuidle driver [1/2] ARM: dts: imx7s: enable cpuidle driver - - - --- 2018-08-29 Anson Huang New
ARM: dts: imx7d-sdb: enable gpio buttons as wakeup source ARM: dts: imx7d-sdb: enable gpio buttons as wakeup source - 1 - --- 2018-08-29 Anson Huang New
[V2,2/2] soc: imx: gpcv2: make pgc driver more generic for other i.MX platforms [V2,1/2] soc: imx: gpc: use A_CORE instread of A7 for more i.MX platforms 1 - - --- 2018-08-28 Anson Huang New
[V2,1/2] soc: imx: gpc: use A_CORE instread of A7 for more i.MX platforms [V2,1/2] soc: imx: gpc: use A_CORE instread of A7 for more i.MX platforms 1 - - --- 2018-08-28 Anson Huang New
[V2,2/2] dt-bindings: arm: add missing compatible for i.MX boards [V2,1/2] ARM: dts: imx6ull-14x14-evk: correct machine model name - 1 - --- 2018-08-23 Anson Huang New
[V2,1/2] ARM: dts: imx6ull-14x14-evk: correct machine model name [V2,1/2] ARM: dts: imx6ull-14x14-evk: correct machine model name - - - --- 2018-08-23 Anson Huang New
ARM: dts: imx6ull: correct machine model name ARM: dts: imx6ull: correct machine model name - - - --- 2018-08-23 Anson Huang New
[2/2] clk: imx: imx7d: remove clks_init_on array [1/2] clk: imx: imx7d: remove unnecessary clocks from clks_init_on array - - - --- 2018-08-08 Anson Huang New
[1/2] clk: imx: imx7d: remove unnecessary clocks from clks_init_on array [1/2] clk: imx: imx7d: remove unnecessary clocks from clks_init_on array - - - --- 2018-08-08 Anson Huang New
[2/2] soc: imx: gpcv2: make pgc driver more generic for other i.MX platforms [1/2] soc: imx: gpc: use A_CORE instread of A7 for more i.MX platforms 1 - - --- 2018-08-06 Anson Huang New
[1/2] soc: imx: gpc: use A_CORE instread of A7 for more i.MX platforms [1/2] soc: imx: gpc: use A_CORE instread of A7 for more i.MX platforms 1 - - --- 2018-08-06 Anson Huang New
ARM: dts: imx7s: remove snvs_poweroff node ARM: dts: imx7s: remove snvs_poweroff node - - - --- 2018-08-06 Anson Huang New
ARM: dts: imx7ulp: update pinfunc header file ARM: dts: imx7ulp: update pinfunc header file 1 - - --- 2018-07-30 Anson Huang New
ARM: dts: imx6sll: add gpio-ranges property - - - --- 2018-07-20 Anson Huang New
ARM: dts: imx7d: remove "operating-points" property for cpu1 - - - --- 2018-07-19 Anson Huang New
ARM: dts: imx7d: add missing OPP property for cpu0 - - - --- 2018-07-18 Anson Huang New
[4/4] ARM: dts: imx6sl-evk: make pfuze100 sw4 always on - - - --- 2018-07-17 Anson Huang New
[3/4] ARM: dts: imx6sll-evk: make pfuze100 sw4 always on - - - --- 2018-07-17 Anson Huang New
[2/4] ARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on - - - --- 2018-07-17 Anson Huang New
[1/4] ARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on - - - --- 2018-07-17 Anson Huang New
[V2] soc: imx: gpc: restrict register range for regmap access - 1 - --- 2018-07-17 Anson Huang New
soc: imx: gpc: restrict register range for regmap access - 1 - --- 2018-07-16 Anson Huang New
[V2] ARM: dts: imx6sl-evk: add missing GPIO iomux setting - - - --- 2018-07-14 Anson Huang New
[3/3] ARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel - 1 - --- 2018-07-13 Anson Huang New
[2/3] ARM: dts: imx6sll-evk: correct lcd regulator GPIO pin - 1 - --- 2018-07-13 Anson Huang New
[1/3] ARM: dts: imx6sll-evk: enable PWM1 for backlight driver - 1 - --- 2018-07-13 Anson Huang New
ARM: dts: imx6sl-evk: add missing GPIO iomux setting - - - --- 2018-07-13 Anson Huang New
[V2,2/2] ARM: dts: imx6sx: add ocram_s support - 1 - --- 2018-07-11 Anson Huang New
[V2,1/2] clk: imx: add ocram_s clock for i.mx6sx - 1 - --- 2018-07-11 Anson Huang New
[2/2] ARM: dts: imx6sx: add ocram_s support - - - --- 2018-07-10 Anson Huang New
[1/2] clk: imx: add ocram_s clock for i.mx6sx - - - --- 2018-07-10 Anson Huang New
[V2] ARM: dts: imx6: correct anatop regulators range - 1 - --- 2018-07-02 Anson Huang New
ARM: dts: imx6: correct anatop regulators range - - - --- 2018-06-29 Anson Huang New
[V2] ARM: dts: imx6sll-evk: enable usdhc3 slot - - - --- 2018-06-28 Anson Huang New
ARM: dts: imx6sll-evk: enable usdhc3 slot - - - --- 2018-06-27 Anson Huang New
[V2] ARM: dts: make pfuze switch always-on for imx platforms - 1 - --- 2018-06-27 Anson Huang New
[V3] ARM: dts: imx6sll-evk: make pfuze100 sw4 always on - 1 - --- 2018-06-27 Anson Huang New
ARM: dts: make pfuze switch always-on for imx platforms - 1 - --- 2018-06-26 Anson Huang New
[V2] ARM: dts: imx6sll-evk: make pfuze100 sw4 always on - 1 - --- 2018-06-26 Anson Huang New
[2/2] ARM: dts: imx6sll: add gpio clocks - 1 - --- 2018-06-22 Anson Huang New
[1/2] clk: imx6sll: add GPIO LPCGs 1 1 - --- 2018-06-22 Anson Huang New
ARM: dts: imx6sll-evk: make pfuze100 sw4 always on - - - --- 2018-06-22 Anson Huang New
ARM: imx: enable bus auto clock gating function for i.mx6sll - - - --- 2018-06-22 Anson Huang New
ARM: dts: imx6sll: declare src module to be compatible to imx51's src - 1 - --- 2018-06-20 Anson Huang New
[V2,4/4] clk: imx6ul: remove clks_init_on array - 1 - --- 2018-06-04 Anson Huang New
[V2,3/4] clk: imx6sx: remove clks_init_on array - 1 - --- 2018-06-04 Anson Huang New
[V2,2/4] clk: imx6sl: remove clks_init_on array - 1 - --- 2018-06-04 Anson Huang New
[V2,1/4] clk: imx6q: remove clks_init_on array - 1 - --- 2018-06-04 Anson Huang New
[4/4] clk: imx6ul: remove clks_init_on array - - - --- 2018-06-03 Anson Huang New
[3/4] clk: imx6sx: remove clks_init_on array - - - --- 2018-06-03 Anson Huang New
[2/4] clk: imx6sl: remove clks_init_on array - - - --- 2018-06-03 Anson Huang New
[1/4] clk: imx6q: remove clks_init_on array - - - --- 2018-06-03 Anson Huang New
[V2,3/3] ARM: imx: remove i.MX6SLL support in i.MX6SL cpu idle driver - 1 - --- 2018-06-03 Anson Huang New
[V2,2/3] ARM: imx: add cpu idle support for i.MX6SLL - - - --- 2018-06-03 Anson Huang New
[V2,1/3] ARM: imx: add L2 page power control for GPC - 1 - --- 2018-06-03 Anson Huang New
[V2,2/2] ARM: dts: imx6ul: add GPIO clocks - 2 - --- 2018-06-03 Anson Huang New
[V2,1/2] clk: imx6ul: add GPIO clock gates 1 1 - --- 2018-06-03 Anson Huang New
[2/2] ARM: imx: add mem mode suspend for i.MX6SLL - - - --- 2018-05-31 Anson Huang New
[1/2] ARM: imx: add standby mode suspend for i.MX6SLL - - - --- 2018-05-31 Anson Huang New
[3/3] ARM: imx: remove i.MX6SLL support in i.MX6SL cpu idle driver - - - --- 2018-05-30 Anson Huang New
[2/3] ARM: imx: add cpu idle support for i.MX6SLL - - - --- 2018-05-30 Anson Huang New
[1/3] ARM: imx: add L2 page power control for GPC - - - --- 2018-05-30 Anson Huang New
[V2] soc: imx: gpcv2: correct PGC offset 1 1 - --- 2018-05-30 Anson Huang New
soc: imx: gpcv2: correct PGC offset 1 - - --- 2018-05-29 Anson Huang New
« 1 2 ... 11 12 13 14 »