diff mbox series

[RFC,v1,004/256] cl8k: add Makefile

Message ID 20210617160223.160998-5-viktor.barna@celeno.com (mailing list archive)
State RFC
Delegated to: Kalle Valo
Headers show
Series wireless: cl8k driver for Celeno IEEE 802.11ax devices | expand

Commit Message

Viktor Barna June 17, 2021, 3:58 p.m. UTC
From: Viktor Barna <viktor.barna@celeno.com>

(Part of the split. Please, take a look at the cover letter for more
details).

Signed-off-by: Viktor Barna <viktor.barna@celeno.com>
---
 drivers/net/wireless/celeno/cl8k/Makefile | 149 ++++++++++++++++++++++
 1 file changed, 149 insertions(+)
 create mode 100644 drivers/net/wireless/celeno/cl8k/Makefile

--
2.30.0
diff mbox series

Patch

diff --git a/drivers/net/wireless/celeno/cl8k/Makefile b/drivers/net/wireless/celeno/cl8k/Makefile
new file mode 100644
index 000000000000..188da2ea2dfd
--- /dev/null
+++ b/drivers/net/wireless/celeno/cl8k/Makefile
@@ -0,0 +1,149 @@ 
+# SPDX-License-Identifier: MIT
+obj-$(CONFIG_CL8K) += cl8k.o
+
+# Stop these C90 warnings. We use C99.
+ccflags-y += -Wno-declaration-after-statement -g -Werror
+
+IFACE_PREFIX=wlan
+
+ccflags-y += -D__CHECK_ENDIAN__ -DDEBUG -DCL_IFACE_PREFIX=\"$(IFACE_PREFIX)\"
+cl-objs += \
+       wrs/wrs.o \
+       wrs/wrs_api.o \
+       wrs/wrs_cli.o \
+       wrs/wrs_tables.o \
+       wrs/wrs_rssi.o \
+       wrs/wrs_sta.o \
+       wrs/wrs_ap.o \
+       wrs/wrs_stats.o \
+       phy/phy_common_lut.o\
+       phy/phy_olympus_lut.o\
+       phy/phy_athos_lut.o\
+       reg/reg_cli.o \
+       key.o \
+       sta.o \
+       hw.o \
+       chip.o \
+       fw/msg_tx.o \
+       fw/fw_msg.o \
+       utils/utils.o \
+       channel.o \
+       utils/string.o \
+       rx/rx.o \
+       rx/rx_amsdu.o \
+       tx/tx.o \
+       tx/tx_amsdu.o \
+       vendor_cmd.o \
+       main.o \
+       mac_addr.o \
+       ops.o \
+       ampdu.o \
+       dfs/dfs.o \
+       tx/tx_inject.o \
+       enhanced_tim.o \
+       e2p.o \
+       chan_info.o \
+       edca.o \
+       calib.o \
+       utils/timer.o \
+       tx/agg_cfm.o \
+       tx/single_cfm.o \
+       tx/bcmc_cfm.o \
+       tx/tx_queue.o \
+       stats.o \
+       cca.o \
+       noise.o \
+       tx/baw.o \
+       power.o \
+       power_cli.o \
+       power_table.o \
+       motion_sense.o \
+       dfs/radar.o \
+       bf.o \
+       sounding.o \
+       dbgfile.o \
+       temperature.o \
+       recovery.o \
+       phy/phy.o \
+       prot_mode.o \
+       rate_ctrl.o \
+       radio.o \
+       config.o \
+       tcv_config.o \
+       chip_config.o \
+       rsrc_mgmt.o \
+       traffic.o \
+       rssi.o \
+       fw/fw_file.o \
+       utils/file.o \
+       rx/rx_filter.o \
+       vns.o \
+       env_det.o \
+       maintenance.o \
+       ela.o \
+       fw/fw_dbg.o \
+       ext/dyn_mcast_rate.o \
+       ext/dyn_bcast_rate.o \
+       vif.o \
+       mib.o \
+       band.o \
+       tx/agg_tx_report.o \
+       hw_assert.o \
+       dsp.o \
+       rf_boot.o \
+       ate.o \
+       afe.o \
+       tx/sw_txhdr.o \
+       fem.o \
+       chandef.o \
+       version.o \
+       cap.o \
+       agc_params.o \
+       utils/ip.o \
+       ext/vlan_dscp.o \
+       netlink.o \
+       twt_frame.o \
+       twt.o \
+       twt_cli.o \
+       cecli.o \
+       mac80211.o \
+       omi.o \
+       data_rates.o \
+       rx/rx_reorder.o
+
+ccflags-y += -I$(src) -I$(srctree)/net/wireless -I$(srctree)/net/mac80211/
+
+ifdef CONFIG_DEBUG_FS
+       CONFIG_CL_DEBUGFS=y
+endif
+
+ifdef CONFIG_CL_DEBUGFS
+       ccflags-y += -DCONFIG_CL_DEBUGFS
+       cl-objs += coredump.o
+       cl-objs += debugfs.o
+endif
+
+ifeq ($(CONFIG_CL8K_TRACE),y)
+# Without this flag, the trace.h will be searched for in include/trace/events,
+# which is not what we desire.
+       CFLAGS_trace.o := -I$(src) -Wno-unused-variable -Wno-uninitialized
+       cl-objs += trace.o
+       ccflags-y += -DTRACE_SUPPORT
+endif
+
+ifeq ($(CONFIG_CL8K_PCI),y)
+ccflags-y += -DCONFIG_CL_PCIE
+cl-objs += \
+       bus/pci/pci.o \
+       bus/pci/rx_pci.o \
+       bus/pci/tx_pci.o \
+       bus/pci/msg_pci.o \
+       fw/msg_cfm.o \
+       fw/msg_rx.o \
+       bus/pci/ipc.o \
+       bus/pci/irq.o
+endif
+
+ifneq ($(CONFIG_CL8K),)
+cl8k-y += $(cl-objs)
+endif